Rivco risers on Classic Rocket?

jeepster09

.060 Over
Joined
Sep 3, 2007
Messages
183
Location
Twin Cities MN. USA
Has anyone put Rivco Risers on Classic Rocket that already has the pull back bars? Will they fit without different cables? I know alot of people have done it on the Standard model; I was thinking it would make the Classic even more comfortable. 8)
 
I have the risers on my standard with the classic bar kit. The kit came with longer cables for the throttle, clutch, and brake. I did not use the brake cable that was supplied because it was not stainless. It works great!
Wayne
 
I have them on my '06 Classic and they installed easily...a little tank rubbing from the throttle cables when turned hard over to the left, but other than that there were no issues and no longer cables required.
 
They work just fine on my Classic Tourer. The clutch cable could be an inch or so longer but rerouting it slightly makes it work. I didn't get any cables with mine.
 
Just put mine on last saturday as Captan Rich said slight rubbing but no longer cables or brakeline required just rerouting 8)
 
+1, but the stock cable retainers lack retention power to keep rerouted cables in place, so they always pull out of their anchor holes. 8)
 
You must log in or register to reply here.

Similar threads

Rivco Risers
Replies
0
Views
605
WingNut
Windscreen for my classic
Replies
5
Views
747
Ishrub
Rivco Risers install issues
2 3
Replies
21
Views
3K
Ishrub
Nice phone mount on Amazon
2
Replies
12
Views
960
Mittzy
Looking for advices on a good luggage bag(Italy aftermarket)
Replies
1
Views
786
Hockeyfreak
Menu
Log in
Register