Radial brake caliper

[Bow]

I won't to use a pair off radial brake calipers. Because they have more stopping power then original and they are in user condition not so expensive as some other. But i need a bracket for that. To convert from axial to radial. Does anybody know where to buy these brackets. Or maybe you have done it your self and can share the drawing

 

[Bow]

Close the topic. I bought some blue spot calipers from Yamaha. They are excellent with sinttered pads

 

[JRock]

Why close it? Can't you share some info. like how you get it to fit on the rocket?
Pictures, etc.
Sharing is a good thing.

 

[Bow]

Oke . But the blue spot is not radial. But i can make pictures. That will take some time to. First make a bracket.

 

[warp9.9]

Oke . But the blue spot is not radial. But i can make pictures. That will take some time to. First make a bracket.

Just so you know @Paul Bryant designed a bracket to radially mount a front caliper underslung on the rear. Not sure if he is selling them??? If so I'm interested in it also.

 

[Paul Bryant]

Just so you know @Paul Bryant designed a bracket to radially mount a front caliper underslung on the rear. Not sure if he is selling them??? If so I'm interested in it also.

Yes Warp, I started this project, have the plates cut out but didn't get to finish it.

 

[Kevin frazier]

Yes Warp, I started this project, have the plates cut out but didn't get to finish it.

Can you whip up a set of brackets for a touring and include in my postal? Just fronts will be ok, i know youre a busy man

 

[Paul Bryant]

Can you whip up a set of brackets for a touring and include in my postal? Just fronts will be ok, i know youre a busy man

This is only for the rear Kevin, on the front I have Pretech six pot Calipers.

 

[Scholle]

I did it the other way. Took a Öhlins USD fork from a Ducati Hypermotard SP with 48mm diameter and 180mm suspension, replaced the OEM springs by stiffer springs. Fender is taken from a Suzuki M 1800, slightly modified. Works really great, but a lot of work...
Regards, Georg

 

[Speedy]

Very nice! Did you pre-measure the spacing of the calipers to discs on the OEM wheels, did you need to make spacers, or where you just lucky? Must feel like a different bike with those forks.