alselec .060 Over Joined Aug 11, 2006 Messages 162 Sep 24, 2008 #1 Anyone have the Rivco center stand? Do you like it? Does it scrape on corners?
Bishop Turbocharged Joined Sep 24, 2007 Messages 824 Ride 2005 Rocket III Sep 24, 2008 #2 Do a search, I think you'll find a 50/50 mix on opinions about it. From what I understand, getting it mounted may require some cutting and/or grinding as not all Rockets were created equal. Personally, I don't see the need for it.
Do a search, I think you'll find a 50/50 mix on opinions about it. From what I understand, getting it mounted may require some cutting and/or grinding as not all Rockets were created equal. Personally, I don't see the need for it.
motorat .020 Over Joined Jul 27, 2008 Messages 30 Sep 24, 2008 #3 i have one that you can have for $200.00. it does not work with the r3t. one issue is that the right side has 2 holes and the more rear one is stripped out but it could be drilled out and a longer bolt used. might be worth saving $150
i have one that you can have for $200.00. it does not work with the r3t. one issue is that the right side has 2 holes and the more rear one is stripped out but it could be drilled out and a longer bolt used. might be worth saving $150
alselec .060 Over Joined Aug 11, 2006 Messages 162 Sep 27, 2008 #4 motorat, does your stand work ok, any scrapes on corners? The Gold Wings and others have them so they must able the be lifted and work ok on corners.
motorat, does your stand work ok, any scrapes on corners? The Gold Wings and others have them so they must able the be lifted and work ok on corners.