The Triumph 12 volt outlet mounts on the left side in front of the seat and behind the bear claw on a small triangle plastic cover. The hole is pre-drilled with a insert. Remove the insert and plug the triumph outlet into the cable provided behind the cover. It took less than 5 minutes.
Triumph's GPS power cable is a connector on one end, which plugs into the wire harness under the tank and two heat shrink butt connectors on the other. I purchased a Garmin motorcycle mount, connected the wires to the Triumph harness and placed the GPS on a Ram mount. Once the tank is lifted, it too is a five minute job.
I now have power on the left side below the seat, on the front right frame cover and at the bars for GPS.