Colorado Mac
.020 Over
I got my 2018 Rocket III Roadster delivered from Concord NH about a week ago. I didn't even start it when it was delivered - I had to leave immediately to hop on a plane for work. I got home on Friday and tried to start the bike today and - it doesn't start! I read the starting procedure in the owner's manual. I did the following, in order:
1. Sit on the bike and put the kickstand up.
2. Make sure the kill switch is in the ON position.
3. Turn the key to the ON position.
4. Check that the bike is in N.
5. Push the starter button.
All the electrical components seem to be operating. the needles go to pinned and back to zero. When I hit the starter button, there is a loud click but the bike doesn't turn over at all. Anyone have any ideas??
1. Sit on the bike and put the kickstand up.
2. Make sure the kill switch is in the ON position.
3. Turn the key to the ON position.
4. Check that the bike is in N.
5. Push the starter button.
All the electrical components seem to be operating. the needles go to pinned and back to zero. When I hit the starter button, there is a loud click but the bike doesn't turn over at all. Anyone have any ideas??