valmacmiami
.060 Over
- Joined
- Feb 5, 2008
- Messages
- 144
Warp when I ease off the power I hear a clunk noise coming from low front left on engine
All gears select properly but a tad noisy
I have renewed about 5000 miles ago back diff and drive shaft after both failed all new bearings in gearbox
I am wondering if I have maybe overheated or stressed the large spring on the torque converter or maybe clutch springs
have lost their tension
Bike runs well apart from this almost 75,000 very hard miles as you know I abuse this bike on a regular basis
Will need to open up just interested to see what you think before I do.
All gears select properly but a tad noisy
I have renewed about 5000 miles ago back diff and drive shaft after both failed all new bearings in gearbox
I am wondering if I have maybe overheated or stressed the large spring on the torque converter or maybe clutch springs
have lost their tension
Bike runs well apart from this almost 75,000 very hard miles as you know I abuse this bike on a regular basis
Will need to open up just interested to see what you think before I do.