New Gizmo

[laraza]

@scot in exile can I ask where you got yhe ram mount? Can't find one to work with my t-bars from @chandelierman

 

[scot in exile]

The mount came with the pod300, it is not designed for 1.5 bars I had to cut half the mount off that fits over the bars so the screws could reach, I am going to modify a ram mount flat plate I have lying around, the pod300 has four threaded connectors on the rear just a matter of drilling a few holes thru the ram mount plate and a few bolts now you will have to get a 1.5" mount I have a few that I picked up off eBay for about twenty bucks.

 

[barbagris]

only part missing is where do I connect it to? and how -thinking a posilock, .

Speed sensor signal wire (sorry I can't remember the colour off hand) - PosiTap works fine - it's behind that ruddy left side triangular cover thingie. The PCV compares the ticks to the rpm ticks and DynoJet include the gear ratios in teh R3 maps. So it knows which gear too.

 

[scot in exile]

Speed sensor signal wire (sorry I can't remember the colour off hand) - PosiTap works fine - it's behind that ruddy left side triangular cover thingie. The PCV compares the ticks to the rpm ticks and DynoJet include the gear ratios in teh R3 maps. So it knows which gear too.

Cheers I will go and buy some wire and a few posiocks right after the Wolves/Newcastle game.

 

[scot in exile]

The ram-mount works fine as in the holes line up perfectly with the pod300, I have a few adjustable clamps like the one in the picture that workfine or you can get the 1.5" ones that are a lot harder to steal.

 

[scot in exile]

Anything here look familiar ---which wire do I cut and if I cut the wrong one will the bike explode??????

 

[warp9.9]

Anything here look familiar ---which wire do I cut and if I cut the wrong one will the bike explode??????

Looks like your other left. Where @Tripps he is in your sunny state he should be able to look at his.

 

[leatal]

Looks like your other left. Where @Tripps he is in your sunny state he should be able to look at his.

Funny! The wire you want is normally attached to the metal bracket behind the plastic accessory plug panel. The wire you need is pink/yellow. It is attached to a three wire triangular plug with two other wires (black wire and black/yellow wire). I used a Posi-tap on the pink/yellow wire, worked real well and allows easy removal if need be.

 

[scot in exile]

Funny! The wire you want is normally attached to the metal bracket behind the plastic accessory plug panel. The wire you need is pink/yellow. It is attached to a three wire triangular plug with two other wires (black wire and black/yellow wire). I used a Posi-tap on the pink/yellow wire, worked real well and allows easy removal if need be.

Sir you are a scholar and a gentleman, appreciate the info and for that I owe you a breakfast on me as you are only 120 miles up the road i will make a trip one day.

 

[barbagris]

Use a Posi-TAP - No cutting. I really hate tapping - but Ken convinced me - and the posi-tap retains the original cable integrity.