need help with tuneboy

Ok i got P1614 ECM or tune ID incorrect code
 
ECM or tune ID Incorrect Instrument ID Matching Flashing (engine light) is what I have in the manual I have but does not contain the roadster. I am guessing this was a touring thing first since the ecu and mapping was similar. It sounds like your not even linked up. Just in case compare your password that tune boy sent you to whats in TUNE Edit. Also just in case it got altered by accident.
You can if you want send me the map and I will try to open it.
szczepaniak@grics.net
 
If it's the newest TuneBoy and Windiws7, I doubt you will get it to work without disabling Anti-Virus protection.
I went problems, then went to a dedicated laptop that I only use for tuning. Coincidentally HP Tuner that I use on my cage vehicles would not work either with Norton installed.
I completely removed Norton and both work fine now. For some reason Norton always managed to disable both just a little quicker than I could get a tune loaded.

Also TuneBoy will not recognize any tune that has been touched by Tune ECU.
 
it is very hard to connect to ECU, It seems like the only way
it is very hard to connect to ECU, it seems that the only way to make it work is to do it in certain order, but once I'm on and vehicle light on TuneBoy is on I downloaded every map from the Roadster folder. Every map looked like a successful download but after " circle ignition off and on and press any key to reconnect" message, my bike didn't start and the "check engine" light was blinking. Before I did all that, I disabled McAfee antivirus. I don't know much about it but to me looks like I flushed OEM base tune 020685. If I could get it back, would solve my problem. Also "recover from failed download" wasn't highlighted so I couldn't use that option.
 
it is very hard to connect to ECU, it seems that the only way to make it work is to do it in certain order, but once I'm on and vehicle light on TuneBoy is on I downloaded every map from the Roadster folder. Every map looked like a successful download but after " circle ignition off and on and press any key to reconnect" message, my bike didn't start and the "check engine" light was blinking. Before I did all that, I disabled McAfee antivirus. I don't know much about it but to me looks like I flushed OEM base tune 020685. If I could get it back, would solve my problem. Also "recover from failed download" wasn't highlighted so I couldn't use that option.
 
Did your tune boy install not come with a load of maps? Like stock ones and various basic mods ones for all kinds of bikes
 
You must log in or register to reply here.

Similar threads

I need serious help with "missing spark".......
Replies
8
Views
1K
TURBO200R4
Trunk with support wheel
Replies
7
Views
731
Jagster
help wanted
4 5 6
Replies
58
Views
5K
Iain66
Front brake disks (rotors) with ABS replacement
Replies
5
Views
593
atomsplitter
I need advice on selling my 2005 Rocket classic
Replies
9
Views
2K
Sparky59
Menu
Log in
Register