Need a drive shaft for 2022 GT

[imcool]

If the shaft itself is good you could try taking it to a specialist drive-line shop. The bearings will almost certainly just be an off the shelf product that they can source.

21 Triumph Rocket III 3 GT 2500 driveshaft drive shaft | eBay

Part was removed from a 2021 Triumph Rocket III GT. VIN: SMTG10JX9MTAE6082. Shelf 24-2-2-B. I will do my best to resolve the issue.

www.ebay.com

 

[lotus]

Thanks..... I'll check it out. Have asked seller how many miles on shaft

 

[TURBO200R4]

i would say that maybe this is the u joint that you need.
several numbers of the same joint
precision 345, master pro 345 neapco/dana 2-4805
caps 1.066 on the dana 2-4805 with holes in the clip like the triumph.
most of the others are 1.0625=1 1/16 or 1 1/8=1.125
this info from 12 years ago

 

[imcool]

looks like really easy DIY job to replace U joint, have you considered it? watching some YT videos on how to replace ujoin on shafts?

 

[lotus]

i would say that maybe this is the u joint that you need.
several numbers of the same joint
precision 345, master pro 345 neapco/dana 2-4805
caps 1.066 on the dana 2-4805 with holes in the clip like the triumph.
most of the others are 1.0625=1 1/16 or 1 1/8=1.125
this info from 12 years ago

Thanks for the info..... However, mine is a 2022 and wouldn't think they'd be the same, but maybe
This is a place to start.
I've never rebuilt an U-Joint before, but doesn't look that difficult

 

[Jhortz]

Thanks for the info..... However, mine is a 2022 and wouldn't think they'd be the same, but maybe
This is a place to start.
I've never rebuilt an U-Joint before, but doesn't look that difficult

It's not difficult, but if you're not sure a driveline shop will source the right joint and replace them for you.