? How to quick test if ignition switch is faulty?

cskals

.060 Over
Joined
Apr 12, 2017
Messages
104
Location
Fyn, Denmark
Ride
R3 standard 2005
Hi guys.
I'm having a problem with my bike, and I think it's the ign. switch, but not sure.

How do I test real quick if that's the issue?

I'm working on a Motogadget M-Lock solution, but do to this Corona ****, it's hard to get a hold of one.
Until then, I'd like to be able to ride.

So if I can cut som wires and do a quick fix, I'd be in heaven

Thanks in advance.
 

Attachments

  • 94101313_651328775661684_7192476358436454400_n.jpg
    21.4 KB · Views: 62
It is probably the white wire which has come unsoldered inside the switch. It is possible to take the switch apart and re-solder it. It is also possible to make a digital bypass, if you look in the link in my signature. Or contact @DEcosse for the best plug'n'play system.
 
Thanks for the input.
The idea was to install the Motogadget M-Lock system, I will have it on thursday by mail.

But until then, I'd like to be able to ride
So my ? is, can I take the white, brown and yellow wire, and put a switch on them, and the 4 others together, would that work?
 

I can verify that if you twist the white/black and red and blue together in one bunch and all the others together in another bunch you will be bypassing the switch.

*correction: disregard blue, that is for touring only
 
You must log in or register to reply here.

Similar threads

eliminating clutch switch
Replies
4
Views
397
Journeyman
Ignition Switch?
2
Replies
19
Views
3K
admiralrocket
Test Rode The R3... But....
2
Replies
12
Views
857
rick danger
How to clean mark off?
Replies
0
Views
358
flyingz06
Kill Switch NO/NC
2
Replies
14
Views
2K
TURBO200R4
Menu
Log in
Register