How do I get read off the pops on deacceleration ?

[DesertRat]

Pull in the clutch lever
Lol

Thanks Turbo...I spit my Drink Out! lmao

 

[Penner]

Thank you!!
Map signal is 500 . so just add 20% all over from 1000rpm - 7500rpm ?
what about the 0 column ? i figure out that each 1% is about 20 numbers . Is the 0 column is just reference? leave it 0 or change it also?

So at anything below 500 from 1200 to 7500 add 20%. (If you change fuel tables in Tune-ECU it is always percent.)
Leave the 0 column alone.
But all that is just an attempt and it does not have to work. Though it usually helps.
Also copy the 2% ETV tables in the columns down to 0% from 1500 to 7500.

 

[Mevorach]

So at anything below 500 from 1200 to 7500 add 20%. (If you change fuel tables in Tune-ECU it is always percent.)
Leave the 0 column alone.
But all that is just an attempt and it does not have to work. Though it usually helps.
Also copy the 2% ETV tables in the columns down to 0% from 1500 to 7500.

Thank you so much. I will try it and let you all know if it helped.