Handlebar risers

[JackC]

I was looking at a R3T outfit at the Vintage Japanese bike show in Uttoxeter. Other than a neat wrap around top box he had a set of adjustable handlebar risers fitted. He said he got them from M&P, but I don't see them on their website. Has anyone else seen any adjustable risers fitted to a R3T. I need to do something to bring the bars back a bit as I feel as if I am stretching a bit causing me to slouch. Not great if any longer trips are undertaken.

Jack

 

[xhdskip]

Jack, do you know a machinist?
You could have some made to your liking
for about the same price as a set from Triumph or Rivco.

 

[hooky]

jackc that guy must have had them from someone . Get back to him and have him confirm who he had them from. Then let me know . Regards hooky.

 

[laraza]

These are some highway hawk ones which are easy to find in UK. Do a search as a few of us have done other things to risers/bars

56-0651 - NEW!
£127.00
Highway Hawk adjustable risers.
6.5" high. M10 mounting.

 

[JackC]

I didn't get his name, but he was from the London area. He did say the location on the site wasn't where you might expect handlebar risers to be, but I browsed the whole website. I will look out for one of their catalogs at one of the shows.
Rox do one I might try and let you know how it goes.
Skips other option of having one made also has some possibilities I could look at.

 

[JackC]

Thanks laraza,

Looks like my options may be growing.

 

[AJS2300]

Risers

Jack, I have the same problem. But while on another R3 forum I saw someone had used risers from a Thunderbird without having to replace or reroute the cables.
My bike goes in for her first service hopefully next week when they will fit a set on her.
I will let you know how they do,if there compatible.

 

[Elvis]

I think the Rivco risers are super and now have no neck or shoulder pain

 

[JackC]

Thanks for all the feedback guys. I bought a pair of ROX adjustable units with a 2.75" lift. They fit onto the standard clamps so minimal phaffing about. I will let you know how they fit and how they look when they are fitted. I will have a stab at putting up some photo's.

 

[JackC]

Well it has taken a while due to limited time, but here is the photo's of the ROX adjustable risers. They take them up about 35mm and back by the same.
I added the accessory sockets while I was at it. I also extended the clutch cable by 30mm.
First time posting photos so if it's not successful this time I will try again.


---
I am here: http://maps.google.com/maps?ll=52.959603,-1.985421
Sent from my iPhone using Tapatalk
Jack Caldwell