Finding Neutral - the fix

[stingray]

I'm wondering if fluid stayed barely over that bleeder, would it stop the air from getting in.

 

[Journeyman]

I'm wondering if fluid stayed barely over that bleeder, would it stop the air from getting in.

I've thought about that too. When you bring the fluid level down to the top of the overfill line that screw sits high.

 

[stingray]

I've thought about that too. When you bring the fluid level down to the top of the overfill line that screw sits high.

Since DOT4 won't hurt anything, I may try overfilling it next clutch fluid change.

Wish there was one of those bleed screws at the abs module.

 

[SonOfJorEl]

Came to the forum looking for some information because my 2016 R3R has stopped going into neutral 90% of the time.
It was never this bad and annoying. I also noticed that when the clutch is fully pressed at a stoplight the RPM is dancing up and down quote a lot.
I did get the bike Dyno'd and ECU flashed a month ago.
I wonder if this could be the problem and solution.

 

[A1A Rider]

It was never this bad and annoying. I also noticed that when the clutch is fully pressed at a stoplight the RPM is dancing up and down quote a lot.

I think it is a symptom of a worn clutch. The plates no longer can keep the pressure even.