Attachments

  • IMG_4892.jpg
    IMG_4892.jpg
    84.8 KB · Views: 13
  • IMG_4895.jpg
    IMG_4895.jpg
    13.5 KB · Views: 13
will do, also the 2 bolts are 3mm hex head. And it's so much easier to take the license plate off and remove the 3 bolts which are torx head and then there are 4 more torx head to remove the mud guard. Seems like more work but it will save you lots of time

I believe they are 3mm allen head.
2 under the turn signals and 2 on the back.
Everything has loctite so it may seem tough at first.
I had to jam a thin flat head next to the nut on the turn signal.
Thank you both! I will give it one more shot this week - else I'll have to go to the dealership - worried I'll strip those
 
So there might be some electrical issues with new Storm models? These would be half price of Triumph originals...
I don't think the storm have any electrical issues. They should have the updated programming for LED turn signals already since they are the new models. So it should be plug and play and work out the box would be my guess. I don't have a storm though mines a '21 gt. At most you may have to wire in resisters to each signal.
 
Back
Top