Evotech LED Scrolling Signals

biker1059 said:
That's what I was thinking, it hasn't been updated in a while.
Click to expand...
I incorrectly connected the wires after positioning the signals. This caused three quick hyper flashes. It confused me because, before disassembling anything, I had connected the signals to the wires to check for hyper flashes. I would ensure they are connected properly, as they will still signal with three quick flashes when connected backward. Not saying you did but I did while hooking them up and that was my experience lol .
 
biker1059 said:
I tried the wiring both ways thinking that was the problem but no luck it was even worse. I'm almost certain I had the wiring right
Click to expand...
Ahh makes sense then back to the May need to have an update done to the ECU. And if they doesn't work the rissitors .
 
So, um, how do you remove the rear indicators? Mine is loose and I can't tighten or loosen it

Rear turn indicator loose

Not sure when, but somehow, my rear left turn indicator (2025 storm GT) is loose. Guessing somebody bumped into it at the parking garage - no visible cracks/scratches. I tried to tighten the 5mm Allen screw, but it just seems to spin without doing anything. Any guidance on how to realign and...
www.r3owners.net
 
There are two bolts under each blinker and that separates the blinker housing. Then look between the back mud guard and the bottom of the blinker housing and there are two more bolts mounted horizontally, Those two are a ***** which are the ones that will tighten the whole housing.
 
What size are those 2? I can't get any size to fit there
 
will do, also the 2 bolts are 3mm hex head. And it's so much easier to take the license plate off and remove the 3 bolts which are torx head and then there are 4 more torx head to remove the mud guard. Seems like more work but it will save you lots of time
 
Last edited:
dd14x said:
What size are those 2? I can't get any size to fit there
Click to expand...
I believe they are 3mm allen head.
2 under the turn signals and 2 on the back.
Everything has loctite so it may seem tough at first.
I had to jam a thin flat head next to the nut on the turn signal.
 

Attachments

  • IMG_4890.jpeg
    94.4 KB · Views: 5
  • IMG_4889.jpeg
    90.2 KB · Views: 6
You must log in or register to reply here.

Similar threads

NEED HELP WITH EVOTECH TAIL TIDY INSTALL
Replies
2
Views
377
dfresh
Scorpion tail delete is done - transferred the plate to the side of the rear wheel and moved the rear turn signals
Replies
7
Views
701
AzRocketman
Evotech Performance Phone or GPS Mount?
Replies
5
Views
780
acim
LED headlight options?
Replies
4
Views
426
Hollow Man
Anyone install the WUNDERKIND turn signals?
Replies
2
Views
1K
EskimoPie
Menu
Log in
Register