I've been trying to get ride of decel pop since installing triple filters. I've been adding to the F trim at zero throttle between 100-2200 rpm and a little at 1% throttle in the same range. It's gotten better but I still get some loud popping around 1500 rpm. I can control it with just a little throttle or pulling the clutch.
It rums great at all power settings except as mentioned , no flat spots, the idle is okay.
The F and L tables are the same as Hanso's map but I replaced the ignition table with Tripp's K&N underseat ignition tables. This seamed to help with the popping and it runs smoother at lower power settings.
I have a 2005 standard with TORs, CAT eliminator, and triple K&N filters.
Wish I could help you with your map, it is the same one I am running in my bike and it was without question going Bang, Bang Bang, and not pop, pop, pop.... I have the PCV on my bike and added 10% to the zero throttle position from 1500 to 7000 rpm in the fuel table. The banging and the popping is now gone... just a nice deep, mean ass sounding rumble on decel now...
I would be checking for air leaks in exhaust and also the flanges between the Throttle bodies and engine head if you cant find any leaks here is your map back to yo with the word "decel" added to name and the L tables changed to allow for decel poping