Balanced throttle bodies and WOW!

cootertwo

Living Legend
Joined
Mar 24, 2013
Messages
2,140
Location
Labelle Florida USA
Ride
2013 Rocket, 2004 Harley, 2006 Harley, 2004 Kaw
After many hours of reading, and tinkering, finally beginning to get a grasp on Tune ECU. And from the many posts I've read on here (thank you Warp) I got my second 2005 purring like a kitten. Twist the grip and she howls like a lion! I added the 3 K&N's. Side covers removed for cleaning, took off rear back rest, and the Triumph saggy bags. Still a work in progress, but man what a difference balancing the throttle bodies made. Not a bad deal for $3500:):):):):):):):):):)
 
After many hours of reading, and tinkering, finally beginning to get a grasp on Tune ECU. And from the many posts I've read on here (thank you Warp) I got my second 2005 purring like a kitten. Twist the grip and she howls like a lion! I added the 3 K&N's. Side covers removed for cleaning, took off rear back rest, and the Triumph saggy bags. Still a work in progress, but man what a difference balancing the throttle bodies made. Not a bad deal for $3500:):):):):):):):):):)

What values did you end up with? Mine have been off and I can't get them right on.
 
After tinkering from one screw to the other, I lucked out and got 620 across the board! I'll have another you tube video soon. Found a cut in the rear tire, so I've got to mount the 2 new Avons that UPS left here yesterday.
 
Last edited:
Nice one Cooter.

On my 2014 R3R IIRC screw between 1 & 2 seemed to work opposite way to one between 2 & 3. Got all mine spot on too then did ISCV which needed adjusting I found it affected the balance so repeated procedure with TB and ISCV until all was spot on. Silky, silky smooth - until you play then Roooooaaaaar !!
 
Back
Top