air sensors Ramair

tripX

.040 Over
Joined
Oct 16, 2019
Messages
95
Location
Adelaide South Australia
Ride
2008 clasic
Fitted Ramair and cat delete single open muffler. The is a sensor in the Ramair intake I noticed there is one in the old airbox as well . what if anything should be done with this sensor. Cheers
 
Jvheli said:
Using the extension plug for the AIT just move it from the removed plenum to the Ramair filter. Clamp using the supplied clamp.

It’s all covered in the instructions!
Click to expand...
Yes I have done that . I'm talking about the sensor in the airbox under the seat .
 
Jvheli said:
Using the extension plug for the AIT just move it from the removed plenum to the Ramair filter. Clamp using the supplied clamp.

It’s all covered in the instructions!
Click to expand...
Thanks I just found out it's a map sensor so it will stay in place
 
Cool avatar that slammed truck and rocket go good together, bad boy style
 
tripX said:
Thanks I just found out it's a map sensor so it will stay in place
Click to expand...
The map sensor was attached to the plenum via 1 bolt it was mounted a few inches behind the AIT on the plenum. It also has a lage vacuum line. The sensor under the seat in the air box where the filter goes senses atmospheric pressure changes ie. altitude, it is the barometric pressure sensor. It can stay there . A few might have moved it so it wasn't sitting in a stagnant box of hot air. A better choice is to plumb fesh air into the box cooling the box that your sitting on.
 
Last edited:
You must log in or register to reply here.

Similar threads

Torrs, cat delete and Ramair question
Replies
2
Views
653
Bandit1
Ramair replacement filter for Rocket 3
Replies
3
Views
527
Mongler07
O2 Sensor Thread Size?
Replies
6
Views
287
TURBO200R4
Air intake sensor mounting
Replies
0
Views
511
r3badboy
Air filters and rain
2 3
Replies
24
Views
2K
mexican
Menu
Log in
Register