pcv

Recent contents Top users
  1. Steel

    ECU or PCV?

    2012 R3R Pipercross intake Carpenter Brute Pipe PCV with AT. Took it in for a dyno run just to see what she was doing. It seems to pull pretty much the same in 3rd and 5th gear. It has a little stumble in 4th at 5750 rpms. I was wondering if anyone has any ideas. The A/F map in the PCV/AT is...
  2. carlsonp

    PCV Stupid Questions

    Hi All: I've installed the Ramair filters and and a PCV +AT on my 2013 Roadster. I have loaded Hanso's AFR map into the PCV and enabled the AT on it. I have not done anything else with TuneECU as of yet. After I connected the the USB from my computer to the PCV, with the ignition on, I sent...

  3. PCV and headers/collector question.

    Hi folks, brand new here and just posted my intro. Two questions kept me searching this site and the web all night. I know some stuff still from having my T-bird modded and found most of the info I need on the forum but here is what's bugging me. 1) I want to get the Triumph Tors for my bike...
  4. pierre

    PCV temperature settings

    Hello Just setting up my PCV + AT and have wired in the engine temp to the analogue input, my problem is it needs a calibration range Volts 0-5 / temp ? -?. does anybody have that data as I cant find it anywhere the good old manual only gives a resistance reading at one temp! any help...
  5. captain jack

    Dyno Video with Ramair & PCV

    Had the Dyno tune & PCV fitted on Friday, he puts them up on U tube so if you want to waste 5mins take a look. (hope I got the link right) Had it back today for tweaking with cat box removed, no vid of that though.
  6. rash_powder

    copying ecu tune to PCV

    So I would like to run the tune PowerTripp posted for the R3T, but I have already done the triple K&N mod. My understanding is that this will cause things to run lean a bit. I have a PCV/AutoTune installed to cover that aspect of things with my current setup. I figure that if I can copy the...
  7. dbutton12

    Anyone play with the PCV ignition module?

    I'm considering the 6-103 ignition module for the PCV. I was under the impression that the new PCV could do ignition mapping, but that apparently is only for the twins (after reading the fine print).:(:( At this point I don't know if the benefits would justify the additional $360 for the...
  8. Steel

    Tune ECU / PCV help

    2012 R3R. Had Tune ECU with PCV/AT. was running great. This morning I installed Hanso's new tune in both. Took her for a ride, still running great. Got home. Tried to change a couple of parameters (raised RPMs). Went for a test ride. Oh crap its not good. Between 2000-3000 it sputters and...
  9. R3Tex

    PCV +AT Issue

    Thought I would throw this up for more of a place holder than anything else, but here's the issue...my auto tune doesn't seem to be talking to my PCV and it's throwing a "2303 - VR Module - Signal Unsynced" error code. Just got off the phone with Hanso and we have some ideas but will also be...

  10. PCV w/autotune issues

    I am having issues getting the PCV to work, I have A no fire situation with the unit hooked up, I disconnect it and the bike will fire right up. Talked to Dynojet and we did a firmware update but it didn't help. the gentleman was suppose to talk to the R&D tech and call me back but never did, I...

  11. Adding PCV w/Autotune

    I am making a few changes to my Rocket, they will include Jardines, PCV w/autotune to go along with my triple K&Ns. My question is do I need to change the map in my bike as well as a good base map for the PCV to make it all work as good as possible? I do have both Tuneboy and Tune ecu, any and...
  12. motolink

    Mounting the PCV & A/T on Roadster

    Any of the Roadster owners have photos of where their PCV & A/T are mounted. Also where did you pick up the positive power for the A/T. Looking at the fitting instruction they appear to be for earlier models not the Roadster, not much difference except the ECU is mounted with main...

  13. Pcv/at

    Greetings Brain Trust, long time lurker, first time poster, new owner - 11 R3T, 2k virgin. Added AT. Laptop down hard for the moment and can't tap into PCV. Does AT activate automatically in default settings or do you need to activate it through the PCV? If it does auto-activate, what are the...
  14. motolink

    Help to install PCV

    I am having difficulty in getting past the first step, loading the PCV on to my laptop. Should I be able to open up the maps on the CD, the CD only lists maps up to 2010. I have been able to load the software onto the laptop with no maps but can seem to get maps loaded into the map file...
  15. DRMD421

    PCV and Autotune

    Tuneboy? TuneEcu? I am looking to crank a few more horses out of my Scooter. I was searching the forums here and know quite a few of you have gone the autotune route. Someone please help me and explain some of the advantages/ disadvantages of doing this and maybe even where you would purchase a...

  16. A tuners take on the PCV w Auto-Tune

    Last night I talked to the service manager/tuner at my local stealer who I've been going to for quite a while for service even before I had an R3 with other bikes I've owned about the PCV w Auto-Tune. He stated that unless you are changing something internally, or are adding a totally...
  17. dtgiese

    PCV & Autotune package

    Here's the deal, I got crazy and purchased a Dynojet PCV 21-003 with a AT-200 auto tune for my 2009 R3T. I had my ride Dynoed by Wayne Tripp last year but was thinking it would help out with my fuel mileage. After 2 months and 1000 miles I have realized I wasted my money, great performance but...
  18. pierre

    PCV + AT v Tuneecu

    Tech question I'm sure someone can answer. According to PCV this sits on the output side of the bikes ECU and modifies the signal to suit our requirements! So if the PCV is adjusting the fuel flow what map should be in the bikes ECU?? a standard map ?? If the TuneECU map is updated to suit the...
  19. natural275

    PCV Map Sending Error

    I have been trying to upgrade the map in my PCV but when I send the new map I get an error message that the device and map are incompatible (device type #320 and map type #170). I tried loading Hanso's map without success. Contacted Dynojet; they didn't know what the problem was and said to...
  20. Evil Mitch

    Pcv help

    Is there anything special i need to know when loading a tune into my pcv "no auto tune" anything i need to reset in the pcv -that i dont know of" my bike is running like a bag of **** i have cleaned the filters resealed the exhaust but on a cold start she struggles and i hear a click and a pop...
Back
Top