Corbin Gunfighter Seat

dfresh · Jul 19, 2024

Einar said:
Are you on the R seat or the GT seat? The R seat is about 1" higher than the GT. (See image below of the R seat's outline superimposed over the GT seat.)

Corbin's comparison tool shows it being a bit higher than the GT seat--so about the same height as the R seat, but still as far back as the GT seat (and with better back support).

Good point. I’m on the GT seat though unfortunately as far as that goes. It’s plenty comfortable enough for me for shorter rides and my Indian is better configured for longer rides anyways. I still like how Corbin’s look though and they are super comfortable once broken in.

Vector · Jul 21, 2024

monstertorch said:
Few months ago, I did a good 5+ hr ride with the stock gt seat, I hurt for days afterwards… got my Corbin 2 weeks ago, did a 11 hr outing, 7 hrs in the seat, felt great… still had to get off the bike every few hours, but that’s fine. My seating area is leather, rest is a combo of different vinyls basically. As mentioned, the seat fit fine, and putting the trim on wasn’t hard, I just took my time. This is my 5th Corbin, firm, but supportive, love these seats

Thank you for an informative response.

Vector · Jul 21, 2024

Thanks guys, just ordered. Natural black leather seat, red leather welt, gray stitching, flat black sides and tail.

stoids · Aug 31, 2026

Here's my Corbin Gunfighter. Matte Black sides & tail, Smoke Bomber Jacket leather seat, Medium Silver stitching, Dark Brushed Aluminum welt. Upholstery is excellent, seat pan not so much ... spent many hours grinding down the rubber feet to get it to sort-of fit but I'm still left with a bit of a gap by the tank. Seat is very firm, I hope it breaks in! BTW I did not transfer the trim from my old seat (so I can swap them easily). If you buy them like I did the trim part numbers you need are T2310543 (rubber trim), T2309846 (RH aluminum finisher) and T2309847 (LH aluminum finisher).

Rick111 · Aug 31, 2026

Great looking seat looks hardcore with the bomber jacket leather .I have had Corbin’s on 4 bikes they are well made but firm. As pointed out above seat pan is not top shelf. Happy motoring .

3VEL 1 · Saturday at 12:48 AM

Einar said:
Are you on the R seat or the GT seat? The R seat is about 1" higher than the GT. (See image below of the R seat's outline superimposed over the GT seat.)

Corbin's comparison tool shows it being a bit higher than the GT seat--so about the same height as the R seat, but still as far back as the GT seat (and with better back support).

I received and installed a Corbin Gunfighter seat on my 2025 Rocket 3 GT Evel Knievel edition. I thought I would chime in here.
First, compared to the stock GT seat, the Corbin is about 1" higher.

Here's a couple of pictures to show the difference. Both pictures were taken from the high side with the bike on its kickstand.

3VEL 1 · Saturday at 12:57 AM

I think the Corbin seat looks great, and I had one on my previous 2007 Rocket III Classic. Super comfortable for me. I am 6'-3" and about 250lbs, with a 34" inseam.

I got a Navy Blue Leather seating surface with Red stitching and accent, with Black Alligator Vinyl on the sides and back.

The Blue and Red match the Evel Knievel colors very well. Not exact, of course, but they look good together.

Installation was simple, with a few tips:
1) You need to transfer the trim pieces from the stock seat to the Corbin. To do this, you will need both Metric and English allen wrenches (the stock seat uses Metric allen screws, the Corbin uses English allen screws, which are provided).
2) I had to insert a washer under the stud to get it to lock, as others have found.

I will be removing the stock backrest sissy bar - waiting for the parts to arrive.

Here's a few more pictures - before and after, etc. I hope you all find them useful.

Rick111 · Saturday at 10:47 PM

Very nice , blue match’s well

Corbin Gunfighter Seat

dfresh

.040 Over

Vector

Supercharged

Vector

Supercharged

stoids

Standard Bore

Rick111

.060 Over

3VEL 1

Standard Bore

3VEL 1

Standard Bore

Attachments

Rick111

.060 Over

Similar threads

Forums

Features

Forum Usage