Coil Over Plug mod (COP) for standard coil removal

Cheers mate, ive just done ohms check on them all, 1.5 ohm each, so that's ok, it'll be weekend or following that I start fitting, going to get them all wired up and shrink wrapped first, thanks for help!
No worries, more than happy to help. They can be a bit of a complicated demanding bit of kit, not dissimilar to some wives/girlfriends, but hey, the smile they can put on your face is unquestionable. tc ex pom in Oz
 
Some Real good information on here, my understanding is R1 coils 2002-2003 to make sure they have the correct resistance, that and to be wire in pairs so both plug red wires to live on the loom, and both black to the trigger wire on the loom, and thats it !

very simple mod in my understanding here and i like the idea of extra space under the tank, also in m pipeline of work is the 3 smaller K&N pods so i can keep the bear claw, and this paired with the coil mod will give me LOTS of room under the tank !.

thanks for the info everyone ! will put this mod on my to do list !
 
Some Real good information on here, my understanding is R1 coils 2002-2003 to make sure they have the correct resistance, that and to be wire in pairs so both plug red wires to live on the loom, and both black to the trigger wire on the loom, and thats it !

very simple mod in my understanding here and i like the idea of extra space under the tank, also in m pipeline of work is the 3 smaller K&N pods so i can keep the bear claw, and this paired with the coil mod will give me LOTS of room under the tank !.

thanks for the info everyone ! will put this mod on my to do list !
Its a really simple job, just make sure soldering is good and shrink wrap the lot
 
So, I'm considering doing this conversion.
I note on EBAY that F6T558 was also fitted to. MT07.
Is it F6T558 more important than the model and year of the bike it was fitted to?
Thanks
Daz
 
So, I'm considering doing this conversion.
I note on EBAY that F6T558 was also fitted to. MT07.
Is it F6T558 more important than the model and year of the bike it was fitted to?
Thanks
Daz
the ONLY important thing is that the ohms math works out and that they fit. The F6T558 will do fine, that's what i got for a LOT less $$$ than the Mitsubishi and also finding them is difficult. Amazon is like $35 for 4, you need 6. DO IT
 
the ONLY important thing is that the ohms math works out and that they fit. The F6T558 will do fine, that's what i got for a LOT less $$$ than the Mitsubishi and also finding them is difficult. Amazon is like $35 for 4, you need 6.
Searching an auction site brings up a few new and used F6T558. From what I've read previously, used is better than new, and if Its the FST558 that is important, then i shall hunt six of them down, plus wiring and plugs

Thanks

Daz
 
Searching an auction site brings up a few new and used F6T558. From what I've read previously, used is better than new, and if Its the FST558 that is important, then i shall hunt six of them down, plus wiring and plugs

Thanks

Daz
I have 2 spare sat in the shed as i purchased 2 sets to do mine just as an FYI.
£80 a set they cost me about 8 months ago !
If you interested in these 2 let me know i csn post them out for £40 if you cool with that just half the set that way your not buying 2 set also ans having 2 spare.
 
Back
Top