What did you do to your Rocket today?

[chris haentjens]

Not my bike but my buddies...Worzol...we put Lamonster's plate relocator on the bike...an 'R' model...also the backrest,,,,the flyscreen is still hanging on wire in the shed after several coats of rubber paint on the inside of it. You can see the tank emblem too which also is one of Lamonster's products...He has good quality products guys so get in and support him.
We couldnt use the factory, stock rear turn signals so we put tempory ones on which i had in my cupboard. When Worzol finds some he likes, we will fit those. Turned out pretty nice...we did think and check everything thru taking our time to get it perfect and are happy with the result.

Did he have any blinker issues using ones other then factory?

 

[Tal]

Did he have any blinker issues using ones other then factory?

No....we put some led Bullets on the rear and just wired them in...i have fitted Bullet style led's to my GT front and rear.....everything goes well.

 

[Stillserving]

I found the pinched wire for my front ABS sensor that was causing my ABS light, and then troubleshot my no right headlight problem. Found the connector for the right side headlight has come loose under the tank. Both issues were probably caused when I was changing my fork springs and other maintenance lately.

OH, and I got to get in some riding today before the snow starts tonight. Happened to get passed by 5 M/C cops while I was tooling down the highway. I got in the left lane and tucked in behind them and ran about 85 all the way home and they were steady pulling away from me. Didn't want to get too close and make them mad!!

 

[Kevin frazier]

Great diagnosis on the when i changed my fork springs and maintenance. Thats the very first thing ive learned with my bike, for the most part so far when theres a problem, i say, ok, what did you do to cause this! Great job and way to get out there and roll with popo at a respectful distance, they probably liked it, they definitely new you were trackin.

 

[KalSaint]

My friend got me some LED accent lights for my birthday back in December and I finally got around to getting them installed.

 

[Ralsmith]

I started on my home made foot peg relocated made from billet 6061 Aluminum. Just need to check fit on this right side peg and then will work on milling out one for

the other side for the roadster passenger foot pegs

 

[MIG]

My friend got me some LED accent lights for my birthday back in December and I finally got around to getting them installed.

That ROCKS!!!
-MIG

 

[Ralsmith]

I started on my home made foot peg relocated made from billet 6061 Aluminum. Just need to check fit on this right side peg and then will work on milling out one for

the other side for the roadster passenger foot pegs

Finished off first side, real happy with how it turned out. Just need to clean ride and final polish on billet, then on to left side.

 

[KalSaint]

After getting new sneakers and tuned the other day, thought the lady needed some boudoir shots.

 

[MIG]

After getting new sneakers and tuned the other day, thought the lady needed some boudoir shots.

LOVE that seat...
-MIG