Vacuum hose routing

TURBO200R4 said:

the fuel filter that i am going to use is wix # 33032 . mine has about 34000 mile on her i should be putting it on. or in
there goes the thread

Click to expand...

EasTexRIII said:

I used that Wix 33032 also. Much cheaper than Triumph filter

Click to expand...

EasTexRIII said:

That means it's not getting fuel - is the filter clogged, or fuel pump not working? You gotta figure out now why you're not getting fuel - I bet since it was running before, but running poorly, it's the fuel filter clogged

Click to expand...

vocaldog said:

Well, there's some progress, but not a total success yet. I replaced the fuel filter. Now the bike will start, but stalls soon after. Vac readings vary between 680 and 720 at idle.(they vary together, so I don't think the throttle bodies are too out of whack) What are the readings supposed to be? Clogged injectors? How would I remedy that?

Click to expand...

vocaldog said:

Vac readings vary between 680 and 720 at idle.(they vary together, so I don't think the throttle bodies are too out of whack) What are the readings supposed to be? Clogged injectors? How would I remedy that?

Click to expand...

EasTexRIII said:

Balance them to within no more than 10 of each other. Throttle system cleaner n 9 volt battery

Click to expand...

vocaldog said:

I can't really balance them because the bike won't stay running. But they do seem to be within that range even though the numbers are jumping around. I can't remember exactly, but while cranking, two of the throttle bodies were exactly the same, the third was only 10 off. I'll get some throttle cleaner and put some injector cleaner in the tank, but what's the 9v battery for?

Click to expand...