TuneBoy and Wego AFR meter

[BruceD]

I am wondering if anybody has designed a spreadsheet to add trims to tuneboy based on the Wego log file?
The fuel tables can be importd into Excel from TuneBoy so can the Wego AFR recordings. However it will require some fancy footwork to extrapolate the results into a trim table in Excel.
I presume the final result will have to be entered into Tuneboy manually?

 

[xhdskip]

Bruce,
all that's Greek to me.
Now God bless the tuneboy guys and everyone who can figure it out,
and speak the techno geek language,
But unfortunatly, I can't.
Now IF you get it figured out and can dumb it down where a not to computer savey man could understand it,
then I'm sure there's lots of us that would appreciate your efforts.
So good luck.
skip

 

[warp9.9]

Bruce, Pedro has used this method as well as I and entering data in tune boy manually its easy. You must have the TPS in sync with the Wego unit for total accuracy. I have been making changes in my tune based on the wego readings and it is getting closer everytime. I am out only in the light throttle criuse areas which I am fine tuning for fuel milage anyway. These are in the low % throttle positions and WOT goes by these areas so fast it does not affect it.