Oil pressure switch wire runs up above the cylinder head towards the left. I was smart enough to remove mine when I did my stator recently, but not smart enough to keep from wringing off the switch when I reinstalled it lol. It's a very small/thin wire all by itself.
looks like a very good way of holding the motor from turning but in the pic looks like u r tightening.
is it possible u r turning the wrong way.
i have heard with pressure on it to hit the bolt/extensions with hammer.
looks like a very good way of holding the motor from turning but in the pic looks like u r tightening.
is it possible u r turning the wrong way.
i have heard with pressure on it to hit the bolt/extensions with hammer.