Transmission Woes

Oil pressure switch wire runs up above the cylinder head towards the left. I was smart enough to remove mine when I did my stator recently, but not smart enough to keep from wringing off the switch when I reinstalled it lol. It's a very small/thin wire all by itself.
 
Based off this image it's that thin one coming off the throttle body harness, right?

1617722625454.png
 
These aren't left hand threads, are they? All of my 200lbs can't break this bolt loose

looks like a very good way of holding the motor from turning but in the pic looks like u r tightening.
is it possible u r turning the wrong way.
i have heard with pressure on it to hit the bolt/extensions with hammer.
 
Back
Top