Torque for rear speed sensor?

[Journeyman]

Reinstalling rear wheel speed sensor disc. Had red loctite on it. Anyone know the torque setting on these little bolts?

Also, torque for final drive flange ("driven flange" in the manual - the gear on wheel that mounts to hub). Blue loctite there....

I couldn't find anything in a search

Many thanks in advance.

 

[R-III-R Turbo]

Driven flange nuts 85Nm (page 16.3)

Re the ABS disc M5 bolts, when doing mine I used 9Nm (similar sized bolts going into aluminium elsewhere on the bike are roundabout that torque) and the threadlock loctite.
Hasn't fallen off yet

 

[1olbull]

85 Nm = 63'lbs
110Nm = 81'lbs

 

[Journeyman]

Driven flange nuts 85Nm (page 16.3)

Re the ABS disc M5 bolts, when doing mine I used 9Nm (similar sized bolts going into aluminium elsewhere on the bike are roundabout that torque) and the threadlock loctite.
Hasn't fallen off yet

I hate it when I can't see something right in front of me. Thanks Turbo. I wish they'd put all the torque specs on a page, instead of sprinkling some of them in the exploded views. Still, I looked right at it.

Also, thanks, regarding the smaller bolts. That sounds about right.