throttle body sync

Throttle Body Balancing - Rocket III
and Classic
Note:
• The Triumph diagnostic tool does not support
the throttle balancing adjustment for Rocket III
Touring. For Rocket III Touring throttle
balancing see page 11-185.
• Rocket III and classic throttles cannot be
balanced using equipment to measure vacuum
in each throttle. Instead, the Triumph
diagnostic tool must be used.
1. Remove the intake cover (see page 1/-147 for
Rocket III and Classic, see page 1/-151 for Rocket III
Touring) to allow access to the adjuster screws.
2. Connect the diagnostic tool, start the engine and
navigate to 'ADJUSTMENTS' (see page 1/-30>.
3. Select 'BALANCE THROTILES'.
T H R 0 T T L E 5
T H R 0 T T L E 1
T H R 0 T T L E 2
T H R 0 T T L E 3
Balance throttles screen
• The balance throttle screens show the vacuum
value of each throttle In mm/Hg. In addition,
when the throttles are balanced to an
acceptable range of each other, the word
'balanced' will appear in the top right hand
corner of the screen. At this point, no further
adjustment is necessary or productive

Click to expand...

Micksan said:

I used the search for throttle body sync-ing. only found a reference using tune ECU to check them.
I am a old Bmw & Moto Guzzi rider. Both of those bikes especially the later really benefited from a mechanical syncing the throttle bodies. I use a Twin Max to do the job.
Does anyone know which body is the master .
I have the bike in the stand for a tune up so want to check this out while I am at it.

Click to expand...

Idaho Red Rocket 3 said:

Is the center set 10 points higher for a reason ? Both my Rockets read 10 points higher for #2 cylinder.

Click to expand...