RIII Forever
.040 Over
- Joined
- Apr 27, 2014
- Messages
- 56
- Location
- Italia, Milano
- Ride
- Rocket 3 Roadster MY 16, Street triple 675
Hello everyone, I have a problem with the idle on cold start, the bike is at about 1300 rpm and I basically have to pull the idle butterfly back by hand near the stepper motor to get it regularized, otherwise it takes several minutes to get regular.
I cleaned the primary TPS sensor (blue already updated the bike is MY 16) made several ISCV reset tests but I notice that I have problems moving 0.60 -> 0.72, in practice setting 0.60 it only goes up to about 0.68 and adjusting the screw of the stepper motor up to beyond the thread and failing to adjust to 0.72.
I think my problem is the clearance adjustment on the cam which is not at 0.5mm
Does anyone know how to do this adjustment?
A thousand thanks
I cleaned the primary TPS sensor (blue already updated the bike is MY 16) made several ISCV reset tests but I notice that I have problems moving 0.60 -> 0.72, in practice setting 0.60 it only goes up to about 0.68 and adjusting the screw of the stepper motor up to beyond the thread and failing to adjust to 0.72.
I think my problem is the clearance adjustment on the cam which is not at 0.5mm
Does anyone know how to do this adjustment?
A thousand thanks