Starting Problem & fix

martyn

.020 Over
Joined
Apr 1, 2006
Messages
21
Location
Maidstone, Kent
Hi

Just thought I would pass on a problem I recently had & what the fix was

After riding in bad weather including snow & getting covered in the crap they put on the road over easter, I came back, cleaned the bike & the next day went to start it, pulled the clutch in, lights were on, pressed starter button .. nothing :?: checked kill switch, then it started. Went to start again, same problem. Traced it to the switch on the clutch lever, the pin was ceased & not returning, full of crud :shock: WD40 & a bit of cleaning sorted it

Hope this helps anyone who might have a similar problem
 
don't think there's a make of bike out there that can handle the salt and crap that we subject em to m8