Rocket III owner since 2006

[EgBeam2003]

I have a seat problem with Aaron 2up seat the back ring for the pillion seems to be missing I don't know if it's tucked in under or broke off. Any ideas on how to unhook to remove the seat. The key works fine on the main seat.

 

[jake shaw]

If it is an older Rocket, the passenger seat is bolted on the the rear fender. Remove driver seat and find 3 bolts and a bracket that holds the rear seat. Hope this helps.

 

[Mike188]

Welcome from South Australia

 

[Stillserving]

If it is an older Rocket, the passenger seat is bolted on the the rear fender. Remove driver seat and find 3 bolts and a bracket that holds the rear seat. Hope this helps.

If it's a "dual seat" (one single seat that is for rider and pillion), then there is the standard release in the front and a second release that is pulled with a ring on the side of the seat near the rear. There's a post on here somewhere w/ pics for this exact problem...

 

[Stillserving]

Here's a pic Herman posted of the bottom of the dual seat awhile back:

https://www.r3owners.net/attachments/20221117_121515-jpg.121053/

 

[TURBO200R4]

I couldn't find mine either and tied a white wire to make it easier to pull
I have to hit my seat with my fist to release the latches
Hth

 

[Brodrock]

I couldn't find mine either and tied a white wire to make it easier to pull
I have to hit my seat with my fist to release the latches
Hth

Sounds like all you need is a newer model. Go out and pick one up today!