weidemann
.020 Over
I cleaned all the old grease off the wheel splines and re-greased that. I did not re-grease the drive shaft. Another excuse to work on the bike to re-grease the driveshaft I suppose. 
MCDVX
LOCATION: Washington DC
TWO DIFFERENT LUBRICANTS?
1. Lube bevel box off the swing frame
2. Grease the drive shaft splines
1. Lube bevel box off the swing frame
2. Grease the drive shaft splines
Steel
Resident Coonass
- Joined
- Nov 17, 2012
- Messages
- 7,849
- Location
- Cut Off, Louisiana USA
- Ride
- 2012 Roadster & 2006 Classic
I use the same grease on both. I got a moly based grease from the Honda shop. It's the one they use to grease the shaft on Goldwings.
Nat67
Rockgoblin
Would have been a good idea to of had the tire shop turn the valve 180 degrees ! Makes checking pressure much easier to have it on the shaft side .
MCDVX
LOCATION: Washington DC
WHAT IS THE NAME OF THAT GREASE?
Steel
Resident Coonass
- Joined
- Nov 17, 2012
- Messages
- 7,849
- Location
- Cut Off, Louisiana USA
- Ride
- 2012 Roadster & 2006 Classic
Honda Moly 60, if I remember correctly.
Ishrub
That's my name ....built like a truck
- Joined
- Feb 18, 2016
- Messages
- 8,857
- Location
- Duffy, Canberra, ACT, AUSTRALIA
- Ride
- 2x2010 ABS Roadsters, Sprint ST 1050 ABS, 3x250s
Apparently no longer available or rare as hen's teeth Most of us are getting this from Amazon, even deliver to Australia dirt cheap.
Loctite 234227 LOC51048 US$31 AUD$43.60 including freight to Canberra Australia.
Driveshaft Spline Lube
Loctite Molly Grease
