Navigator
Living Legend
TriumphPhil called me in the middle of the frustrating process of trying to remove the defective rear brake light switch so that I can replace it. It was fortunate he did because I was about ready to take a fire ax to my Rocket. The first pic is of the switch with the boot off. The second is with a 3/8 drive 22 mm socket and 1/4 inch adapter & ratchet. The clearance at the top is insufficient for a deep socket with a 3/8 ratchet and the standard socket only goes down about 1/3 of the way, not allowing for sufficient purchase to break it loose. It just keeps sliding off.
Before I start to pull my left muffler and crossover (or revert to the fire ax option), has anyone succussfully removed one of these switches? Talk about a bad design. I do believe Triumph built the R3 around this switch.
Edit: I too am finding the new Photobucket process to be unsatisfactory. It used to link to a specific photo, and post it, but now just provides a link to my album.
Edit again: Screw Photobucket. I can't figure out how to post just the pics I wanted.
Before I start to pull my left muffler and crossover (or revert to the fire ax option), has anyone succussfully removed one of these switches? Talk about a bad design. I do believe Triumph built the R3 around this switch.
Edit: I too am finding the new Photobucket process to be unsatisfactory. It used to link to a specific photo, and post it, but now just provides a link to my album.
Edit again: Screw Photobucket. I can't figure out how to post just the pics I wanted.
Last edited by a moderator: