R3 Touring instrument fault X 3

A'up folks.

I've got some instrument panel issues on my 2010 R3 Touring and I'm hoping someone can point me in the right direction.

Speedo not working
Fuel gauge not working
and self cancelling indicators not working

The bike starts and runs OK but with these faults, the indicators work but have to be turned off manually.
The battery is reading 13 volts and over 400 amps. There are no signs of any loose or corroded wiring or connector blocks. It's a low mileage bike and hasn't seen much bad weather.

I've read on the forum that the indicator relay is built into the instrument cluster so I'm thinking the cluster may be fooked.

Any help would be much appreciated.

Start by checking Fuse #3
Use voltmeter with negative probe on battery negative and touch red probe to the metal tabs on each side of the Fuse
You should read 12V on both tabs even with key-off

Thanks for your quick response.

Sorry I should have said, all fuses are good.