ODB port 2020 Rocket 3

[atomsplitter]

To clear that wrench you need to go into "Tests and Adjustments" in TuneECU. To reset the maintenance light using TuneECU, you'll typically navigate to the "Adjustments" menu within the TuneECU app, then select "Reset Service Interval". Ensure your bike's ignition is on, the kill switch is in the middle position, and the engine is not running before attempting the reset. The reset may have a date/mileage already listed and just select it and run it. The wrench light will go out and won't come back on until the date or mileage has arrived. When I bought my GT a coupe weeks ago it had the wrench lit with only 131 miles on the odo. It had timed out, the bike is 2 years old.

This might help you

 

[Kiwicol]

5011man, by rereading your posts, I think you have reset your clock, yeah? but have you also reset your date? If not, go reset it & see if the wrench symbol goes away.

 

[gadget_ho]

Pretty sure if OP still has an issue 3 years later, dude got bigger problems!

 

[Kiwicol]

Bugger, hate replying to old threads, my bad.

 

[dd14x]

My bad for resurrecting an old post - I was just trying to locate the OBD port under the seat - only see the large 20 pin port and have not seen that type on other motorcycles I've had - usually a 6 pin port

 

[gadget_ho]

My bad for resurrecting an old post - I was just trying to locate the OBD port under the seat - only see the large 20 pin port and have not seen that type on other motorcycles I've had - usually a 6 pin port

That’s the one, it’s the same OBD port style that cars have, so your OBD reader plugs straight in (see my pics from page 1) with no adapter cable.