Lifting the Rocket

ozrider said:

I use one no problem, but I made a support stand so it lifts up even that way you can remove front or rear wheel, I have a sketch with measurements if you want

Click to expand...

phar2slo said:

Would love the sketch as I work at the largest steel fabricators in the south island of NZ as an estimator so can get one of the boys to whack something together perfectly..

Could you please upload a picture of bike on the stand Cheers.

Click to expand...

HansO said:

Repco sell an almost identical ATV jack and every so often they have them on special for around the the $150 - $160 mark when I bought mine it was $149

Click to expand...

ozrider said:

mud map as requested,(all measurements in mm)
the prop goes up on the tube that is above the starter motor, it wont work on later bikes because of the ABS unit is in the way.
This is the only pic of the bike on it.

Click to expand...

phar2slo said:

Thanks for the drawing will need to use heavier steel as we don't have anything that lite. What thickness is the top plate?

Thanks again.

Click to expand...