Inexpensive Starter Replacement

12.86 to start
12.62 lights on
10 minutes later 12.48
starter engage 10.59
Engine running 13.83

Seams ok at this point your going to need to check while having problem.
Might check to make sure that starter relay is a 12 volt relay.
 
in the 2008 service manual it states measure voltage @2000rpm, needs to be between 14-15v (page 1.21)
1624869152300.png
 
It's my turn for starting issues and a HUGE Shout-out to all of the folks who provided critical information in this thread. I'm fairly confident my issue is the solenoid, but I am going to go ahead and do the 1.4 starter upgrade along with replacing the cables I got from (I believe) @Mittzy awhile back. (Of course, I have to find them.) I'm glad to see the starter price is still extremely reasonable.

Has anyone found a USA based source for the solenoid rebuild kit? I'm waiting on a response from the eBay UK supplier as, by default, they are not shipping to Arizona.

Thanks!
-MIG
 
It's my turn for starting issues and a HUGE Shout-out to all of the folks who provided critical information in this thread. I'm fairly confident my issue is the solenoid, but I am going to go ahead and do the 1.4 starter upgrade along with replacing the cables I got from (I believe) @Mittzy awhile back. (Of course, I have to find them.) I'm glad to see the starter price is still extremely reasonable.

Has anyone found a USA based source for the solenoid rebuild kit? I'm waiting on a response from the eBay UK supplier as, by default, they are not shipping to Arizona.

Thanks!
-MIG
Find a starter in Tucson az
The solenoid kit is different with the original starter
And the up graded one. Know what you are going to use
 
Back
Top