Increasing rpm

[BigNorm]

I have the remaining set on my 2014 r3t set to 7000rpm. Is there any wayour of increasing this to 9k like the earlier models?

 

[Idaho Red Rocket 3]

Unfortunately Norm it can only be done for $6000 at Carpenter.

 

[kipper]

Norm ,none of the stock Rockets were ever set to rev to 9000,Only the highly tuned ones are capable of this $$$$$$$.

 

[Triple Trouble]

The stock cams run out of power long before you reach 7000 rpm let alone 9000. Not to mention the shim over bucket style won't handle those revs.

 

[BigNorm]

Does anyone make a cam which pulls all the way through the remaining range?

 

[IMFASTTOO]

Does anyone make a cam which pulls all the way through the remaining range?

THERE is no point in raising the rev limit unless you use a CARPENTER pipe that lets the engine breath and makes more HP at higher revs on the stock engine .

 

[kipper]

It takes a bit more than just fittin a cam to do this Norm! $$$$$

 

[BigNorm]

I know it all works as a system. I was thinking of using Lush's cams and pistons eventually that claim to bring the bike up to 200hp. I'm not downplaying Carpenters efforts. I'll do it a step at a time.

 

[Nat67]

Putting a challenge in front of you Norm is like showing a red rag to a bull !
I don't doubt you will achieve this in a most unorthodox fashion probably ?
That snow there needs to melt fast , else come the thaw you gonna be wheeling out a 1000 hp supercharged12 speed nitro burning super rocket !

 

[EasTexRIII]

@BigNorm - I just added a Ramair & wonderful @HansO tune to my previously equipped Tors & cat deleted R3
PHuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuk, anything more than that needs a drag strip!!!!! Seriously

Only RPM I know about is Rocket Pulls MuthahClucker