I have a dead Coil.

[Doc Roc]

Has anyone tried these coils or can someone recommend a good replacement?

 

[atomsplitter]

Accel makes a good coil. You can also do OEM from eBay (new or used).

 

[R-III-R Turbo]

I have a spare coil here if you need one at a reasonable price

 

[Doc Roc]

I have a spare coil here if you need one at a reasonable price

Thanks for the offer mate but I am going to check all the connections first and if still faulty will buy a set of Nology coils.

 

[TriumPhil]

It's usually a weak crimp on the spade wire connectors above each coil that causes the problem good Dr.

Recrimp and coat with some pookie (dielectric grease) and you should be good to go!

 

[pjsmithres]

It's usually a weak crimp on the spade wire connectors above each coil that causes the problem good Dr.

Recrimp and coat with some pookie (dielectric grease) and you should be good to go!

Dielectric grease is your best friend

 

[Doc Roc]

It's usually a weak crimp on the spade wire connectors above each coil that causes the problem good Dr.

Recrimp and coat with some pookie (dielectric grease) and you should be good to go!

Thanks for that, I have not had a chance to lift the tank yet annd have a look. Was holding off buying anything until then.

 

[TriumPhil]

I'll betcha six pack of this fine nectar https://www.beeradvocate.com/beer/profile/12897/45919/ that you don't need a new coil or coils. Jest lift that tank, clean the connectors, crimp em' together nice and tight, pookie 'em up and you'll be back on the road again...

[video=youtube;NvwojnLeMH4]https://www.youtube.com/watch?v=NvwojnLeMH4[/video]

 

[Doc Roc]

Found the problem, one wire had come off number 1 coil. Those engineers at the factory must have been smoking something wierd when they decided to put that coil where it is, just about need an endoscope to find it[wankers].

 

[TriumPhil]

Happy ending, after all, Mate.