HansO
Not Taking Life Too Seriously
- Joined
- Apr 4, 2010
- Messages
- 13,447
- Location
- Batemans Bay, NSW, Aus
- Ride
- 08 Rocket III R.I.P now TEX Triumph Explorer
Sorry been a a few weeks since saying I was going to do this but here is a pictorial with some instructions bare with me as I will probably need to do some editing
Firstly the basic ingredients
For those more skilled please be patient I am doing this so any body with even basic skills can do it
Then you will need to make the power supply wires (50amp) and splice in a second set of ends, also in picture are the other wires that will pick up the switching power and the ones that will be spliced to headlight wires
Using a fine blade screwdriver spilt the wire so the piece to be spliced can be put in and twisted before soldering
then insulate with heat shrink
Now to prepare the ends, sweat some solder on to the exposed wire ends then crimp and solder the brass fittings that come with the relay mounting blocks these will not need to be insulated as they sit inside the blocks
To be continued
Firstly the basic ingredients
For those more skilled please be patient I am doing this so any body with even basic skills can do it
Using a fine blade screwdriver spilt the wire so the piece to be spliced can be put in and twisted before soldering
To be continued