Help please for 2012 roadster w/abs front wheel

OK so since both have a spacer on each side and older ones are one way and the roadsters are arse backwards may I point out if it does not fit the seal on which ever side your working on I would bet money its not the right one and you should try the other one
Back to mowing oh and just because I can

 
them there are nice spacers
 
i hate to be the bearer of bad news
the first thing u should do is see how far the front axle is sticking out of the fork and compare it to r3tex picture.it is going to be possible that some damage has been done, possible bent forks,bent abs sensor ring or cracked or damaged abs sensor,bent rotor right side bent caliper right side, some damage to fork if bolt bottom out in the threads..
i would suggest a pic for us to see.
 
Valid point if the guy put it together and actually used the right torque value or went with I just crank until its tight there very well could be some damage.
 
In their "wisdom" Triumph elected to put the ABS-Rotor side spacer under the ABS system, rather than the Wheel

 
i need to make a correction
the damage might be on the left side the same side as the abs ring
 
already have there is some damage to ABS bracket and sensor, so replacing both of them, will get a pic in a little while. rotors are good some scrape marks on left caliper but more cosmetic than damage. Sensor ring has wear marks but is still usable
 
You must log in or register to reply here.

Similar threads

R3 Roadster
Replies
0
Views
511
Victor K
Larger - rectangular - mirrors for 2016 RIII
Replies
2
Views
265
JeremyMcG1
Bearclaw front bracket?
2
Replies
10
Views
1K
mexican
Bridgestone Exedra Max 240/55R-16 deal for $195.88 each with rebate before tax
Replies
4
Views
640
Mongler07
Coolant type for -09 Classic (IAT/HOAT)
Replies
7
Views
790
wildchild
Menu
Log in
Register