Evil Mitch
LETS RIDE
Cheers[/QUOTE]
Mate just need some advise on the technique used for the bending
do i just kick it
or is some kind of bashing tool implimented 
For Sale Headers and staintune silencers
- Thread starter Evil Mitch
- Start date
Mate just need some advise on the technique used for the bending
do i just kick it or is some kind of bashing tool implimented 
CanberraR3
Living Legend
- Joined
- May 27, 2010
- Messages
- 11,337
- Location
- Canberra, Australia
- Ride
- Triumphs, but no Rocket just now.
I can see why you're confused: stabbing tools are of no use.
TOMCAT
Rage against the machine
- Joined
- Jan 9, 2011
- Messages
- 9,259
- Location
- ALBANY - Western Australia
- Ride
- 2009 RIII Standard - 2008 Speed Triple -1995 900 T'Bird
Use your teeth mate .. grab onto the bracket and just pull it back 5 or 6 mill pisseasy
pisseasy
bruce aussie
WOODENBONG
Mate just need some advise on the technique used for the bending
do i just kick it or is some kind of bashing tool implimented [/QUOTE]12 inch shifter closed up on the bracket then a GENTLE!!!!!! Pull on the handle should be enough.
bruce aussie
WOODENBONG
@Evil Mitch I hear some bikes are getting up around 170hp with the CES and 2-1/2 inch muffler.
Someone earlier didn't know if any CES had been to Nevs, well pretty sure he has done a bike with them on before.
BigKel
242rwhp
I'm using a CES system with engine work from Nev. Probably get a little more out of it with a high volume fuel pump, after 8200rpm the stock pump can't supply enough fuel. A exhaust designed for the worked engine would give some more hp as well, as in a bigger collector pipe and or larger dia headersSomeone earlier didn't know if any CES had been to Nevs, well pretty sure he has done a bike with them on before.
Holy sheeeit that some beech is revving hard , like to hear it at 8200
TOMCAT
Rage against the machine
- Joined
- Jan 9, 2011
- Messages
- 9,259
- Location
- ALBANY - Western Australia
- Ride
- 2009 RIII Standard - 2008 Speed Triple -1995 900 T'Bird
That's how I ended up with Ponter's old Rebands .. he had to get larger diameter headers made up.
Wrecka you got yourself a nice set of headers.
Wrecka you got yourself a nice set of headers.
Overlaid a pic of Mitch's headers onto a pic of my bike , looks like they may not fit but im still buying them and give them a real life fit up when get the chance , i made the layer of Mitchs headers slightly transparent so the original pipes can be seen as well , fkn love the look of those headers on her.
Similar threads
