Fitting motogadget indicators.

Simonb

.020 Over
Joined
Jan 30, 2018
Messages
42
Location
North Wales, UK
Ride
Rocket 3 roadster 2014
Ive just picked up a full set of moto gadget m blaze pin indicators for my 2014 Roadster.
Has anyone fitted these? I’m wondering what relay you had to use or did the stock one work okay as others have claimed.
I’m also after a set of o.e. Type indicators connectors if anyone knows where to get them in the Uk.
Thanks dudes.
 
Like any other typical LED turn signal, the motogadget turn signal can be operated with load resistors or any of our load-independent flasher relays (m.flash, m.wave, m.stop, m.relay+).
Click to expand...
You will need a LOAD INDEPENDENT relay.

This I think may be OK DUAL LOAD L.E.D Flasher Relay Unique Flash Rate Fix New Spec CF13 GL02 SKU T2500531 - calling @laraza

The Motogadget ones will not be plug and play.

Can't remember what the connectors look like. But I simply slotted a more standard set into the wiring.

The Blaze Pin is bright but very small - keep them away from the headlights up front or nobody will notice them.
 

That's the kiddy. Plugs straight in and works whatever combo of turn signals you're using
 
You must log in or register to reply here.

Similar threads

Aftermarket indicators issue
Replies
9
Views
774
ArekDeBoss
Solved - Strange electrical issue - Indicators and wattage.
Replies
3
Views
776
kazjim
Radiator Cap Fitting
Replies
8
Views
2K
jlagrave
Front and Back Signal Indicators Out (on right side)
Replies
9
Views
1K
Joesmoe
Tyre fitting
Replies
0
Views
413
Thunda
Menu
Log in
Register