Engine dresser bars help

SonOfJorEl

.060 Over
Joined
Aug 4, 2021
Messages
102
Location
Woodbridge, Ontario
Ride
2016 Rocket 3 Roadster
Ended up ordering a pair of these engine dresser bars from AliExpress and was totally disappointed. The holes don’t line up.

Any ideas as to what can be done? AliExpress closes the return window within 48 hours and unfortunately I wasn’t able to try these on to the bike in that time.
I don’t really have the tools to bend this to line up so looking for some other ideas.
 

Attachments

  • B50947C3-A653-479C-8C31-AED81F4757C7.jpeg
    67 KB · Views: 54
Just a chance that you could use a 2"x2" trailer hitch end on the back of your buddies pickup truck.....might of used one before.....for a slight adjustment....
 
Sparky59 said:
Just a chance that you could use a 2"x2" trailer hitch end on the back of your buddies pickup truck.....might of used one before.....for a slight adjustment....
Click to expand...
You mean put that curved end in there and try to bend it upwards a little?
 
small hydraulic jack
two X 4 plus some two by 4"s to make a leverage point watch out for tipping over bike
might be able to pull it out a little or loosen top to and pry pointed punch to get a bolt started then align the bolt and tighten the other bolt.
 
Reactions: MIG
Sometimes you get what you pay for.... that site looks real Chineezy....
 
You must log in or register to reply here.

Similar threads

I want to buy T BARS for my 2007 R3
Replies
3
Views
355
Anthony5900
Pics of Roadster with Black Crash Bars on Front/Back?
2
Replies
14
Views
2K
Mittzy
Crash bar
Replies
6
Views
715
thomasbenjamin
Rear Dresser bars
Replies
8
Views
1K
WingNut
Highway bars
Replies
2
Views
1K
Bear Greenhalgh
Menu
Log in
Register