Engine dresser bars help

[SonOfJorEl]

Ended up ordering a pair of these engine dresser bars from AliExpress and was totally disappointed. The holes don’t line up.

Any ideas as to what can be done? AliExpress closes the return window within 48 hours and unfortunately I wasn’t able to try these on to the bike in that time.
I don’t really have the tools to bend this to line up so looking for some other ideas.

 

[Sparky59]

Just a chance that you could use a 2"x2" trailer hitch end on the back of your buddies pickup truck.....might of used one before.....for a slight adjustment....

 

[SonOfJorEl]

Just a chance that you could use a 2"x2" trailer hitch end on the back of your buddies pickup truck.....might of used one before.....for a slight adjustment....

You mean put that curved end in there and try to bend it upwards a little?

 

[TURBO200R4]

small hydraulic jack
two X 4 plus some two by 4"s to make a leverage point watch out for tipping over bike
might be able to pull it out a little or loosen top to and pry pointed punch to get a bolt started then align the bolt and tighten the other bolt.

 

[Jazzyboy]

Sometimes you get what you pay for.... that site looks real Chineezy....

 

[CrzystghndKC]

I can't see anything in your picture.

 

[Vector]

Sounds that Aliexpress are thieves.

 

[SonOfJorEl]

Sometimes you get what you pay for.... that site looks real Chineezy....

Possibly. However, it seems like many other members have purchased these exact same bars. This is currently the best alternative to the original triumphs.

 

[SonOfJorEl]

small hydraulic jack
two X 4 plus some two by 4"s to make a leverage point watch out for tipping over bike
might be able to pull it out a little or loosen top to and pry pointed punch to get a bolt started then align the bolt and tighten the other bolt.

I’m going to give this a shot