Control Cables.

Good day all;
Last year my upgrades to my 2014 R3R was a new Clearview wind screen and the RIVCO riser. This year I would like to replace the throttle, clutch cable and front brake line. I've searched the forum and found that most people recommend Barnett cables for the throttle and the clutch replacement.

I did as most have done here on the forum, I re-routed the stock cables behind the yolk and it all seems to work well but I would like to run the cables as designed, i think it looks better, just my opinion.
I plan on running a 1/4" pice of flex tubbing to get a proper measurement but I was wondering if anyone out there has replaced the cables after installing the RIVCO riser and if so do you remember what length you purchased?

On another note can anyone recommend a good place to purchase the brake line?

Thanks

Hi all..
Just received my throttle and clutch cables from Barnett.
I ordered the OEM plus 2" on the throttle cable and plus 4" on the clutch cable along with the high efficiency liner.
So far I have installed the clutch cable and the length is perfect and the high efficiency coatinnis smooth.
Next will be the throttle cables, I'll post pictures when I'm done