Confirming wire colors

[CrzystghndKC]

2011 Roadster installing a self cancelling turn signal module again and wanting to verify wire colors. Installation manual says
Left signal wire probably GREEN
Right signal wire probably GRAY
Brake light wire probably BLUE
This manual has not been updated in a long time and there is no tech support from them so I'm reaching out to the group for answers. The first unit worked for awhile but then failed and I'm thinking one (Brake) was not hooked up to the correct wire. TIA.

 

[atomsplitter]

According to the standard Rocket schamatic the left signal wire is Grey/Red and the right hand wire is Grey/White. The tail/brake light is gray/purple and yellow. You can find the wiring diagrams here: Index of /r3docs

 

[CrzystghndKC]

According to the standard Rocket schamatic the left signal wire is Grey/Red and the right hand wire is Grey/White. The tail/brake light is gray/purple and yellow. You can find the wiring diagrams here: Index of /r3docs

Thanks I should have looked there first. I forget sometimes the resources available here.

 

[atomsplitter]

You're very welcome. With a bike that has been around as long as the Rocket and this forum, info mining is pretty easy on about any topic.