I think this US$1230 is for one disc and one caliper. 😳
Correct, price per side of front axle. Bonnies etc run with just one.

You probably wouldn't get the stock front brakes from Triumph for that either though.;):(

Well I was wrong on this one, about half the price for stock if Bike Bandits pricing is correct.

1638801589700.png


FRONT BRAKE CALIPER & DISCS​

show BB#
Description
Manufacturer
Part #
# Required
Per Assembly
QtyAvailabilityRetail
Price
Our Price
1: CALIPER ASSY, LH T2020836
705880 >
1On Backorder. None available.
Notify me when this item becomes available.
$503.37$503.37
1: CALIPER ASSY, FRONT, LH T2020388
> 488577
1On Backorder. None available.
Notify me when this item becomes available.
$582.49$582.49
2: CALIPER ASSY, RH T2020837
705880 >
1On Backorder. None available.
Notify me when this item becomes available.
$503.37$503.37
2: CALIPER ASSY, FRONT, RH T2020389
> 488577
1On Backorder. None available.
Notify me when this item becomes available.
$582.49$582.49
3: PISTON SET, NYMFRON, DISHED T2020471
315648 > 440388
2On Backorder. None available.
Notify me when this item becomes available.
$85.47$85.47
3: PISTON & SEAL SET,1/2 NYM,DISH T2020573
488578 >
2On Backorder. None available.
Notify me when this item becomes available.
$68.49$68.49
4: SEAL SET, HALF NYMFRON T2020574
433245 >
2On Backorder. None available.
Notify me when this item becomes available.
$68.11$68.11
4: SEAL KIT T2020243
> 433244
2On Backorder. None available.
Notify me when this item becomes available.
$86.67$86.67
5: PAD PIN T2020247
2Ships within 1 to 2 business days - Non-returnable part$12.87$9.00
6: PAD SPRING T2020258
2Ships within 1 to 2 business days - Non-returnable part$16.69$11.68
7: PAD SET, FRONT T2020245
1Ships within 1 to 2 business days - Non-returnable part$83.23$58.26
7: PAD SET, FRONT T2020393
4 Pads in Set; > 440388
1Ships within 1 to 2 business days - Non-returnable part$88.43$61.90
8: BLEED SCREW SET T2020014
2On Backorder. None available.
Notify me when this item becomes available.
$10.92$10.92
9: DISC ASSY,FR,320,ANODISED T2022500
Not Roadster
2On Backorder. None available.
Notify me when this item becomes available.
$317.36$317.36
9: DISC ASSY, FRONT T2028500
Roadster Only
2On Backorder. None available.
Notify me when this item becomes available.
$349.07$349.07
10: BOLT, DISC T2023233
10Unavailable to ship$8.27$8.27
11: BOLT,HHF,LGHTD,M10X1.25X35,SLV T3205796
4On Backorder. None available.
Notify me when this item becomes available.
$6.89$6.89
12: PLUG, CHROME T3450200
10Ships within 1 to 2 business days - Non-returnable part$2.79$1.95
13: BOLT, CALIPER, P/LOCKED T2020287
4On Backorder. None available.
Notify me when this item becomes available.
$7.71$7.71
14: BOLT,CALIPER,P/LOCKED,E SPEC T2020288
4On Backorder. None available.
Notify me when this item becomes available.
$8.93$8.93
 
Last edited:
Beringer is good when dry. Dangerous in the wet because one has first to apply the brakes to wash the water film on the discs (not ventilated, plain cast iron) and only after go for the real braking. I was almost ****ting my pants while learning this real fast when going at about 100 mph and all of a sudden everything stopped ahead of me on the highway due to a massive multi collision.

Absolutely not happy with the way Beringer anodized color faded even if the bike was always garaged and very little time exposed to the sun/elements. Not happy with their after support, costed me a lot of time in communication, they made promises (German distributor) they never kept/honored.

I wouldn't buy again from them based on that.
 
That is absurd.
Check the price of one of your 4x Bentley brake discs and calipers and you will reckon these are cheap!;):roll::roll::roll:


I know I will never be buying either. ;)
 
Last edited:
Check the price of one of your 4x Bentley brake discs and calipers and you will reckon these are cheap!;):roll::roll::roll:


I know I will never be buying either. ;)
I sold the Bentley a while back. It was requiring and vacuum hose replaced and was an engine out job. $6k job and I just was not using it that much. Time to go.
 
Pretech has closed up.
HEL and Brembo both make 4 pot callipers that will fit a Roadster.
I've been told by a triumph mechanic that you'll get more bang for your buck by upgrading the front master cyl to race quality, for what its worth he thought the stock callipers were ok.
The Roadster has the "upgraded" (bigger bore) master cylinder, if you can find one this does bring the hydraulic ratio correct.
When I fitted the six pot calipers to my Rocket this also improved the ratio as the over all piston area is less than the stock 4 pot units, this has the same effect as fitting the Roadster M/C
 
Back
Top