mexican
Living Legend
Sounds doable, as long as you let me keep my dog
box
- Thread starter xhdskip
- Start date
xhdskip
Living Legend
Got 'er emptied out now Sam,
Thanks.
Also got the first coat of stain on the box today....
Looks real good.
Jackson, I didn't remember but one box.
Heck, I've got a herd of grandkids I'll swap ya.
They don't eat much and they're pretty low maintenance,
wait a minute, they're girls, so nobody would believe that.
OK, they're typical teenagers, HIGH maintenance, loud, obnoxious
and estrogen as thick as maple syrup around pawpaws house.
HELP......
Have box will travel....
HansO
Not Taking Life Too Seriously
- Joined
- Apr 4, 2010
- Messages
- 13,447
- Location
- Batemans Bay, NSW, Aus
- Ride
- 08 Rocket III R.I.P now TEX Triumph Explorer
I hope you stained it Claret Red before you send it to me...... jus kidding that Box looks awesome some real craftman ship thereGot 'er emptied out now Sam,
Thanks.
Also got the first coat of stain on the box today....
Looks real good.
Jackson, I didn't remember but one box.
Heck, I've got a herd of grandkids I'll swap ya.
They don't eat much and they're pretty low maintenance,
wait a minute, they're girls, so nobody would believe that.
OK, they're typical teenagers, HIGH maintenance, loud, obnoxious
and estrogen as thick as maple syrup around pawpaws house.
HELP......
Have box will travel....
Jackson
Supercharged
Haven't done anything to the box as of yet. If I do, I like the natural look. So maybe clear to bring out the wood grain.
xhdskip
Living Legend
I went with a honey stain to richen up the color and patterns of the grain.
Jackson
Supercharged
Looks and sounds right. That natural look is what I like.
NM ROCKET
Supercharged
skip, post a pic when its done.
I received mine last week and was debating on staining it.
I received mine last week and was debating on staining it.
xhdskip
Living Legend
You know I will.
UNCLE JESSE
Nitrous
It does look great, I was looking at the work wondering if he does it free hand or he has a trace machine for his router
xhdskip
Living Legend
Not figured that out yet myself Jesse.
The only way I can see to do it is draw it,
then route a fine line around the letters,
then change out your router bits to a bigger one
and take all the wood away from the letters
leaving them raised on the smooth flat background..
A LOT of work for sure, well that, and a steady hand.....
The only way I can see to do it is draw it,
then route a fine line around the letters,
then change out your router bits to a bigger one
and take all the wood away from the letters
leaving them raised on the smooth flat background..
A LOT of work for sure, well that, and a steady hand.....
