Barnett Clutch Install - To Jutter or Not to Jutter, that is the question

[fastfun]

[QUOTE="warp9.9, post: 674520,

I also use longer stronger clutch spring bolts. Again my opinion a improvement in strength. Blow up a internal clutch hub and you will start looking for weak points agead of time.[/QUOTE]

I agree with the springbolts !I did install those too. But why the different basket ? What are the weak points of the stock basket ? My (Sc) roadster basket is still living.

 

[Gerald]

Your right unless your using a fiber kit that does not use the stuff like I do. I am not sure about the Busa kit Carpenter sells for the Rocket. I also have a different clutch basket

plus use a external return spring for the lifter shaft.

When you use an external spring for clutch shaft return, do you eliminate the factory one at bottom of the lifter shaft.

 

[warp9.9]

When you use an external spring for clutch shaft return, do you eliminate the factory one at bottom of the lifter shaft.

Yes I did .

 

[rainman]

I've never installed a clutch before. It really is a pretty simple task. The hardest part is draining fluids and removing the radiator. Anyone considering doing it themselves should have no trouble.

If I ever decide to do that I'll give you a call

 

[Gerald]

Yes I did .

After I posted I realized how dumb that was, but thanks for your reply.